STW-VG2
A general Stainless Steel (0.1mm/4 thou thick) etch of valve gear, enough for 1 large loco or a few small steam locos.
Included in the etch (mostly at 5.50mm wheel pitch) are various extras including a variety of valve links, return cranks, nuts etc.
Note.
Because the etching process is tricky down at this scale, a 0.2mm+ drill may be required to clear out some of the holes as required.
There are currently no reviews for this product. Be the first to review by clicking below!
Review this product...
. Magnetic Wheels.JPG)