P-055
3Vdc Free-revving Motor without pre-attached gear.
Using the standard TGauge PWM controller, this motor has a range of 50-50,000 RPM
Can be used as a replacement motor in all first and second generation chassis. Removing bogie at end shown then prising top of gearbox will allow access to remove original motor. Solder connection of the wires of replacement motor is recommended and to achieve same direction please checkout the polarity in the above (yellow) image. The standard gear (not included) can be re-used from the original motor and we would recommend the use of low viscosity cyanoacrylate (super glue) to lock firmly in place.
Cable length 120mm.
There are currently no reviews for this product. Be the first to review by clicking below!
Review this product...
 Spring (2).JPG)
